|
|
Design of a Crash-Test Dummy
Sedláčková, Martina ; Coufal, Tomáš (referee) ; Bilík, Martin (advisor)
The main objective of this thesis is construction of crash test dummy for vehicle-pedestrian crash tests. There is review of nowadays used crash test dummies types in the introduction of this thesis. This is followed by part describing construction itself. Chapter about construction begins by characterizing of used materials features in relation with real human body physiology. Main part of chapter is describing construction of crash test dummy’s skeleton and its individual components including 3D modelling and strength analysis. Thesis is finished by cost assessment.
|
|
|
Comparison of unfinished house prices in several stages of construction with the cost of finished construction works
Hanzlíček, Michael ; Cupal, Martin (referee) ; Kosová, Jaroslava (advisor)
The aim of this thesis is compare the price unfinished house in various stages of construction with the cost of executed construction. The price unfinished house was identified by various calculation. The various calculation were compared each other. The chosen methods are develop construction budget, determine prices through technical-economic indicators and of price regulations. Price unfinished buildings and the value of construction works is determined in three separate phases, these phases are described in the thesis itself. Calculation results are processed in graphic form and at the end of this thesis are compared with each other. Assigned task is achieved by a complete itemized budget for a house with no exterior modifications and connections. From final itemized budget are created sub-budget containing structure according to specified stages of construction. In the same stages of construction are made calculations by price indicators and price regulations. Target set in the thesis is filled at the end, all the values are described and compared. The results suggest the use of computational methods is determined by the purpose for which prices are measured. Labor and accuracy while itemized budget is confirmed, the remaining calculations are mainly informative and preliminary pricing satisfactory. The benefit of the work is to verify the use of computational methods for the different phases of the construction process.
|
|
|
Hot-air balloon using and specification requirements review
Olšanová, Markéta ; Třetina, Karel (referee) ; Juračka, Jaroslav (advisor)
The bachelor thesis deals with the history of balloon flying worldwide and in the Czech countries and utilization of the hot-air balloon at present. Furthermore it provides a sur-vey of the biggest world balloon manufacturers, description of the structure and parts of hot air balloons including their types and suitability of their use. Finally, it includes a digest from the construction specifications CS-31 HB as well as the L series regulati-ons valid for operation, identification and registration marking of hot air balloons.
|
|
|
Design of a rotary table for a machine tool
Axmann, Patrik ; Tůma, Jiří (referee) ; Blecha, Petr (advisor)
This bachelor thesis deals with the construction of a rotary table for a machine tool. The first part deals with the system analysis of the problems, namely the use of drives, gear mechanisms, bearings and measuring systems in the design. Subsequently, manufacturers and the creation of variants of design solutions. The second part of the thesis is focused on calculations and design of the chosen design variant.
|
|
|
Design of small table saws
Menšík, Martin ; Vetiška, Jan (referee) ; Pavlík, Jan (advisor)
The aim of this bachelor’s thesis is to design a small semiprofessional table saw. The first part of the thesis describes the issues of table saws. The second part is devoted to research of the market and choosing a suitable construction solution. The result of this thesis is a 3D model of selected solution along with drawings and related calculations of the parts.
|
|
|
Mechanical pretanning in sewage works
Černý, Marian ; Grosman, Martin (referee) ; Němec, Zdeněk (advisor)
The bachelor thesis contains a literature search dealing with mechanical equipment of waste water treatment plants. After introduction of waste treatment there is stated some description of technical and construction search of particular equipment, system of their operating, analysis of their operation parameters and their using on waste water treatment plants in this bachelor thesis. There are described typical ordering of particular equipment in to technological lines on waste water treatment plants. The bachelor thesis contains description of self-cleaning screen, hand skimmed screen, mechanical coarse screen, mechanical fine screen, equipment for grit and sand removing, skimmed cylinder strainers, screw conveyors, screw presses for screenings with washing and integrated coarse pre-treatment. There are published some schemes, sketches, photos and tables of technical parameters above mentioned equipment in this bachelor thesis. The sketches of technical drawing character are treated in Autodesk ACAD 2005 program.
|
|
|
Design of machine tool turntable
Rygl, Ondřej ; Opl, Miroslav (referee) ; Blecha, Petr (advisor)
This bachelor thesis deals with the design of a rotary table for a machine tool. In the first part are described main types of rotary tables, existing approaches being used in design of drives and options in applicating modern components for rotary tables currently available on the market. The purpose of the second part is to design a rotary table with a torque motor drive for application in a milling machine.
|
|
|
Risk analysis of pest infestation of wooden structures
Brada, Stanislav ; Hunková,, Veronika (referee) ; Šebesta, Petr (advisor)
The thesis deals with risks of defect occurrences in a wood construction. Wood constructions and their parts are exposed to a number of negative factors influencing their lifetime. The aim of the thesis is to give an outline of risks of defect occurrences in a wood construction attacked by pests and propose measures for their elimination.. These steps are closely described in the individual parts and processes. Part of the thesis is the FMEA analysis, resulting in appropriate chemical protection, a factor considered before incorporation into the construction. The analysis and its outcomes are important for improvement of the wood construction lifetime.
|
|
|
Wages and prices in construction
Massabni, Raghid ; Aubusová,, Alena (referee) ; Tichá, Alena (advisor)
The aim of my diploma thesis entitled Wages and prices in construction is to introduce the methods of remuneration, types of wages and the calculation procedure, as well as to introduce the types and forms of prices and procedures for creating the price of a construction work. The diploma thesis consists of four basic sections divided into eight chapters and other subchapters. The first section, Wages, contains information on wages and the determination of types of wages. In the second section we will focus on prices in general, their types and forms and prices in construction with budgets. In the last part we will focus on an example item budget of a family house,
|
|
|
The implementation phase of gross upper structure of Silo Tower
Bittnerová, Lucie ; Štěrba, Martin (referee) ; Venkrbec, Václav (advisor)
This bachelor’s thesis deals with the solution of technology gross upper structure Silo Tower in Olomouc. The content of the work is realization of the main technological stages of this object. For the gross stage of the upper structure is processed design of site equipment, technological process for the implementation of prefabricated and monolithic concrete structures, schedule of work, itemized budget and mechanization plan.
|
guest ::
